<strike id="zzpa0"><em id="zzpa0"></em></strike>

    1. 
      
    2. <strike id="zzpa0"></strike>
    3. <thead id="zzpa0"><option id="zzpa0"></option></thead>

      <th id="zzpa0"><video id="zzpa0"></video></th>

        <nav id="zzpa0"></nav>

        <code id="zzpa0"></code>
        1. <code id="zzpa0"></code>
          <center id="zzpa0"></center>
        2. <object id="zzpa0"></object>

          1. <pre id="zzpa0"></pre>

                <object id="zzpa0"></object>
                <th id="zzpa0"><option id="zzpa0"></option></th>
                NEW
                  >   產品中心   >   正文

                E1 to Ethernet Protocol Converter (GFP)

                This model adopts inverse multiplexing technology that transmitting 10/100BaseTs or 10/100Base-FX Ethernet over 1 E1 link. Employing Ethernet-over-PDH technique, it allows the transport of native Ethernet frames over the well-established PDH telecommunications infrastructure. This enables carriers to make use of the extensive legacy PDH and TDM equipment to provide new Ethernet-centric services. It supports flexible configuration if 1 E1 links, auto-detecting the number of E1 and selecting the available channels. It allows certain delay between the E1 link. The rate of one link is 1980kbps, and 7920kbps for 4 links.

                Description

                This model adopts inverse multiplexing technology that transmitting 10/100BaseTs or 10/100Base-FX Ethernet over 1 E1 link.

                Employing Ethernet-over-PDH technique, it allows the transport of native Ethernet frames over the well-established PDH telecommunications infrastructure. This enables carriers to make use of the extensive legacy PDH and TDM equipment to provide new Ethernet-centric services. It supports flexible configuration if 1 E1 links, auto-detecting the number of E1 and selecting the available channels. It allows certain delay between the E1 link. The rate of one link is 1980kbps, and 7920kbps for 4 links.

                Features

                n Realize transparent transmission of Ethernet data over 1 E1 channel. 

                n Provide 100BaseTs Ethernet (or 100Base-FX Ethernet)

                n Allow 1 E1 channels up to 220ms transmission delay. When the delay exceeds allowed limit range, it can stop transmitting data automatically. 

                n Supports Dynamic Ethernet MAC address (4096) with local address filter function.

                n Has 2 loop back functions: E1 local loop, E1 remote loop.

                n E1 interface compatible with ITU-T G.703, and G.823. not supporting signal timeslot.

                n CLK mode: support internal CLK mode and E1 line CLK mode. E1 line CLK realizes auto-switch over the E1 line according the signal quality.

                n Compatible with ITU-T protocol: G.7041 (GFP-F), G.7042 (VCAT, LCAS), G.7043, G.8040.

                n E1 loop detecting: if any channel of E1 loop detected, it will cut off the channel. And after the loop released, the channel will be renewal.

                n Supports resetting remote system from local system.

                n Support Console management and WEB management.

                Parameter 

                        E1 interface

                Standard: E1 interface Compatible with G.703 standard.

                Rate: 2.048Mbit/s±50ppm

                Coding: HDB3

                Impedance: 75Ω (unbalance)/ 120Ω (balance)

                Connector: BNC (75Ω)/ RJ45 (120Ω)

                Jitter Performance:  According to G.742 and G.823 

                 

                10/100Base-T 

                Rate: 10/100M, full/half duplex auto-adapt.

                Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)

                MAC address table: 4096 MAC addresses.

                Ethernet buffer: 64Mbits SDRAM

                Physical interface: RJ45, support AUTO-MDIX (cross over and straight through auto-adapt)

                 

                  10/100Base-FX

                Rate: 100M, full duplex 

                Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)

                MAC address table: 4096 MAC addresses.

                Ethernet buffer: 64Mbits SDRAM

                Physical interface: FC/SC

                Dimension

                 Desktop type: 210(W) × 140 (L) x 30(H) mm

                Operating environment

                Voltage: AC180V ~ 240V; DC –48V

                Power Consumption: ≤5W 

                Working temperature: -10°C~50°C

                Storage temperature: -15°C~70°C

                Humidity: 95 %

                广东快乐十分