• <big id="iclqs"><nobr id="iclqs"></nobr></big>

    <strike id="iclqs"></strike>

    <pre id="iclqs"></pre>
    <code id="iclqs"><nobr id="iclqs"></nobr></code>
    <code id="iclqs"><nobr id="iclqs"><sub id="iclqs"></sub></nobr></code>
    <th id="iclqs"></th>
    <th id="iclqs"></th>
    <code id="iclqs"></code>

    <code id="iclqs"><nobr id="iclqs"></nobr></code><strike id="iclqs"></strike>
  • <code id="iclqs"></code>
  • NEW
      >   产品中心   >   正文

    8E1 to 4Ethernet Protocol Converter

    This model adopts inverse multiplexing technology that transmitting 1-4 10/100BaseTs or 10/100Base-FX Ethernet over 1~8 E1 links. Employing Ethernet-over-PDH technique, it allows the transport of native Ethernet frames over the well-established PDH telecommunications infrastructure. This enables carriers to make use of the extensive legacy PDH and TDM equipment to provide new Ethernet-centric services. It supports flexible configuration if 1~8E1 links, auto-detecting the number of E1 and selecting the available channels. It allows certain delay between the multi-E1 links. The rate of one link is 1980kbps, and 7920kbps for 8 links.

    Product Description

    This model adopts inverse multiplexing technology that transmitting 1-4 10/100BaseTs or 10/100Base-FX Ethernet over 1-8E1 links.

    Employing Ethernet-over-PDH technique, it allows the transport of native Ethernet frames over the well-established PDH telecommunications infrastructure. This enables carriers to make use of the extensive legacy PDH and TDM equipment to provide new Ethernet-centric services.

    It supports flexible configuration if 1~8E1 links, auto-detecting the number of E1 and selecting the available channels. It allows certain delay between the multi-E1 links.

    The rate of one link is 1980kbps, and 7920kbps for 8 links.



    n Realize transparent transmission of Ethernet data over 1 to 8 E1 channels. 

    n Provide 4*100BaseTs Ethernet (or 100Base-FX Ethernet)

    n Allow 8 E1 channels up to 220ms transmission delay. When the delay exceeds allowed limit range, it can stop transmitting data automatically. 

    n Supports Dynamic Ethernet MAC address (4096) with local address filter function.

    n Has 2 loop back functions: E1 local loop, E1 remote loop.

    n E1 interface compatible with ITU-T G.703, and G.823. not supporting signal timeslot.

    n CLK mode: support internal CLK mode and E1 line CLK mode. E1 line CLK realizes auto-switch over the E1 line according the signal quality.

    n Compatible with ITU-T protocol: G.7041 (GFP-F) , G.7042 (VCAT, LCAS), G.7043, G.8040.

    n E1 loop detecting: if any channel of E1 loop detected, it will cut off the channel. And after the loop released, the channel will be renewal.

    n Supports resetting remote system from local system.

    n Support Console management.

    Parameter and Specifications

    n E1 interface

    Standard: E1 interface Compatible with G.703 standard.

    Rate: 2.048Mbit/s±50ppm

    Coding: HDB3

    Impedance: 75Ω (unbalance)/ 120Ω (balance)

    Connector: BNC (75Ω)/ RJ45 (120Ω)

    Jitter Performance: According to G.742 and G.823 


    n 10/100Base-T 

    Rate:10/100M, full/half duplex auto-adapt.

    Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)

    MAC address table: 4096 MAC addresses.

    Ethernet buffer: 64Mbits SDRAM

    Physical interface: RJ45, support AUTO-MDIX (cross over and straight through auto-adapt)


    n 10/100Base-FX

    Rate: 100M, full duplex 

    Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)

    MAC address table: 4096 MAC addresses.

    Ethernet buffer: 64Mbits SDRAM

    Physical interface: FC/SC


    1U/19inch: 483(W)*140(D)*44(H)

    Operating environment

    Voltag: AC180V ~ 240V;DC –48V;

    Power Consumption:  ≤5W 

    Working temperature: -10°C~50°C

    Storage temperature: -15°C~70°C

    Humidity: 95 %

    秒速赛车开奖直播 http://www.daogema.com http://www.daogema.com http://www.daogema.com http://www.daogema.com http://www.daogema.com http://www.daogema.com http://www.daogema.com